Thin-Film Window Continuous Rolls and Precut Circles
Thin-Film Windows for XRF Sample Cups are available in Continuous Rolls, Pre-Cut Circles and SpectroMembrane® Pre-Mounted Carrier Frames. Processing is conducted in a temperature and positive pressure controlled environment to avoid the potential possibility of contamination; packaged and individually plastic sheet shrink-wrapped; and inventoried. Each packaged is assured of the original integrity.
Specifications and Ordering Information
Continuous Rolls, 3" wide x 300' long (7.6 cm x 91.4 m); Serrated Cutting Edge Boxes
| CATALOG NUMBER | WINDOW MATERIAL | THICKNESS |
|---|---|---|
| 090 | Ultra-Polyester | 1.5 μ; 0.00006"; 0.06mil; 0.00152mm |
| 100 | Mylar®; Hostaphan® | 2.5 μ; 0.00010"; 0.10 mil;0.00254mm |
| 150 | Mylar®; Hostaphan® | 3.6 μ; 0.00014"; 0.14 mil; 0.00356mm |
| 250 | Mylar®; Hostaphan® | 6.0 μ; 0.00024"; 0.24 mil; 0.00610mm |
| 416 | Prolene® | 4.0 μ; 0.00016"; 0.16 mil; 0.00406mm |
| 425 | Polypropylene | 6.0 μ; 0.00024"; 0.24 mil; 0.00610mm |
| 440 | Polyimide (Kapton®) | 7.5 μ; 0.00030"; 0.30 mil; 0.00762mm |
| 442* | Polyimide (Kapton®) | 7.5 μ; 0.00030"; 0.30 mil; 0.00762mm |
| 475 | Polypropylene | 12.0 μ; 0.00050"; 0.50 mil; 0.0127mm |
Supplied in 50’ (15.2m) lengths Precut Circles: (500 pieces/box) (2.5" Diameter; 63.5mm)
Precut Circles, 2.5" (63.5 mm) Diameters; (500 pieces/box)
| CATALOG NUMBER | WINDOW MATERIAL | THICKNESS |
|---|---|---|
| 106 | Mylar®; Hostaphan® | 2.5 μ; 0.00010"; 0.10 mil; 0.00254mm |
| 156 | Mylar®; Hostaphan® | 3.6 μ; 0.00014"; 0.14 mil; 0.00356mm |
| 256 | Mylar®; Hostaphan® | 6.0 μ; 0.00024"; 0.24 mil; 0.00610mm |
| 426 | Prolene® | 4.0 μ; 0.00016"; 0.16 mil; 0.00406mm |
| 436 | Polypropylene | 6.0 μ; 0.00024"; 0.24 mil; 0.00610mm |
| 446 | Polyimide (Kapton®) | 7.5 μ; 0.00030"; 0.30 mil; 0.00762mm |
| 476 | Polypropylene | 12.0 μ; 0.00050"; 0.50 mil; 0.0127mm |
Precut Circles, 2.5" (63.5 mm) Diameters; (1000 pieces/box)
| CATALOG NUMBER | WINDOW MATERIAL | THICKNESS |
|---|---|---|
| 107 | Mylar®; Hostaphan® | 2.5 μ; 0.00010"; 0.10 mil; 0.00254mm |
| 157 | Mylar®; Hostaphan® | 3.6 μ; 0.00014"; 0.14 mil; 0.00356mm |
| 257 | Mylar®; Hostaphan® | 6.0 μ; 0.00024"; 0.24 mil; 0.00610mm |
| 427 | Prolene® | 4.0 μ; 0.00016"; 0.16 mil; 0.00406mm |
| 437 | Polypropylene | 6.0 μ; 0.00024"; 0.24 mil; 0.00610mm |
| 447 | Polyimide (Kapton®) | 7.5 μ; 0.00030"; 0.30 mil; 0.00762mm |
| 477 | Polypropylene | 12.0 μ; 0.00050"; 0.50 mil; 0.0127mm |
NOTE: Ultra polyester, Mylar, polypropylene, Prolene and polycarbonate are “unsuitable for
analyzing sulfur in diesel fuel, gasoline and other petroleum products containing aromatics”; ASTM D-4294-03 and ASTM D-6445-99 (2004) and
other independent testing. Refer to Etnom SpectroMembrane Thin-Film Carrier Frames for information regarding exceptional chemical
resistance and higher % Transmission Values.
IMPORTANT: The possibility of pinholes, pores and variations existing in any thin-film sample support substance regardless of form and packaging may present leakage of a sample with subsequent contamination and damage to the analytical instrumentation and its components. It is strongly recommended that each item used be subject to judicious testing, use and applications and evaluation prior to actual use. The responsibility of acceptance and safety resides totally with the user. Chemplex Industries, Inc. assumes no liability or guarantee that thin-film sample supports will perform in accordance with its suggested use.
Prolene® is a registered trademark of Chemplex Industries, Inc.
EtnomTM is a trademark of Chemplex Industries, Inc.
Mylar® and Kapton® are registered trademark s of E.I. Dupont de Nemours
Hostaphan® is a registered trademark of Mitsubishi Films
Reminder to Order Sample Cups
